Soapmaid Australia Soap, Candle & Cosmetic Supplies Australia
Empowering Artisans and Makers - Your Trusted Source for Premium Soap, Candle & Cosmetic Ingredients
Soap Making with Lard: The Complete Guide to a Classic, Creamy Bar

Soap Making with Lard: The Complete Guide to a Classic, Creamy Bar

Soap Making with Lard: The Complete Guide to a Classic, Creamy Bar
Soap Making Guide

Soap Making with Lard: The Complete Guide to a Classic, Creamy Bar

Everything you need to know about lard as a soap making fat: where it comes from, how it behaves, and a simple cold process recipe to try at home.

Fatty acid profile Soap properties Beginner recipe Troubleshooting
Introduction

Why Soap Makers Keep Coming Back to Lard

Long before palm oil and fancy butters arrived on the shelf, most of the soap in the world was made from rendered animal fat. Lard, the rendered fat of the pig, was one of the most common choices, and for good reason: it makes a white, firm, mild bar with a dense, creamy lather and a wonderfully gentle feel on the skin.

Today lard is enjoying a quiet comeback. It is a local, traditional fat that suits soap makers who want a palm-free hard fat, a budget-friendly base oil, or simply a more old-fashioned, rustic approach to their craft. It is also very forgiving for beginners, because it behaves predictably and plays well with almost every other oil on your bench.

In this guide we cover what lard actually is, what is inside it at a fatty acid level, how those fatty acids translate into the qualities of a finished bar, and how to put it all together in a straightforward cold process recipe. If you prefer to make your own calculations, our Soapmaid Lye Calculator will do the maths for you.

Heads up

Lard is an animal-derived ingredient. Soap made with it is not vegan or vegetarian, and that needs to be clear to anyone you share, gift or sell it to. We cover labelling later in this guide.

Chapter 01

What Exactly Is Lard?

Lard is pork fat that has been gently melted (rendered) to separate the pure fat from the meat, connective tissue and moisture. After rendering and straining, you are left with a soft, creamy-white fat that sets solid at room temperature. Not all lard is the same, though. The part of the pig it comes from makes a real difference.

Premium Leaf lard

Leaf lard comes from the visceral fat around the kidneys and loin. It is the most prized grade: very white, firm and almost neutral in aroma. It is the traditional choice for pastry, and it is also excellent for soap if you can get it.

Everyday Back fat lard

Rendered from the fat that runs along the back of the pig. It is slightly softer than leaf lard and can carry a faint savoury note if it was rendered at high heat, but it makes a great soap and is usually easier to source.

Rustic Trimmings and general lard

Fat from other parts of the animal is usually softer, more strongly scented and slightly more variable. It still saponifies beautifully, but if aroma matters to you, start with a cleaner grade.

Wet versus dry rendering

Lard is rendered either with a splash of water (wet rendering) or with no added water at low heat (dry rendering). Wet rendering is gentler and tends to give the whitest, mildest fat. Dry rendering is simpler and gives a slightly richer, more toasty result. For soap, either works, as long as the fat has been strained well and has not been scorched.

From the Soapmaid shelves

Our 100% Australian Lard is a fresh, small-batch rendered fat made from pork fat sourced in Victoria, so it is a lovely, traceable starting point for your first lard soap.

Chapter 02

Inside the Fat: Lard's Fatty Acid Profile

Every fat and oil is built from a handful of fatty acids, and the mix of those fatty acids is what decides how a soap feels, lathers and lasts. Lard sits in a sweet spot: roughly equal parts hard, saturated fats and soft, conditioning unsaturated fats. The numbers below are typical values. They shift a little with the breed of pig, its diet and the cut of fat, so treat them as a guide rather than a guarantee.

Oleic acid · about 44%
Palmitic acid · about 26%
Stearic acid · about 13%
Linoleic acid · about 10%
Palmitoleic acid · about 3%
Myristic acid · about 1 to 2%

What each fatty acid does in your soap

  • Oleic acid is the star of lard and also the main fatty acid in olive oil. It makes soap conditioning, gentle and slow to harden, and it gives a smooth, lotion-like feel.
  • Palmitic acid contributes hardness and a stable, creamy lather. It is the reason lard bars feel firm rather than mushy.
  • Stearic acid adds more hardness and a waxy, long-lasting bar, and it helps the lather stay dense and stable.
  • Linoleic acid is a polyunsaturated fat that adds conditioning, but it is also the part of any fat most prone to going off over time, which is why fresh lard and sensible storage matter (more on that in Chapter 06).
  • Palmitoleic and myristic acids are minor players. Palmitoleic acid is a skin-friendly fat that is also found in the skin's own oils, while myristic acid adds a touch of cleansing and bubbles.
Key takeaway

Lard contains almost no lauric acid, which is the fatty acid responsible for big, bubbly lather in coconut oil. That means lard on its own makes a mild, creamy, low-bubble bar. To get lather, you pair it with a little coconut oil or castor oil, which is exactly what the recipe in Chapter 05 does.

Chapter 03

Lard Properties at a Glance

Soap calculators describe oils using a set of standard numbers. These are the typical values for lard, with a plain-English meaning for each.

Hardness: about 41

A solid, moderate-to-high hardness. Lard gives a bar structure and longevity without being brittle, which is why it can stand in for a lot of the hardness that palm oil usually supplies.

Cleansing: about 1

Practically none. Lard is very mild and does not strip the skin, which is part of its charm. A little coconut oil in the blend brings the cleansing up to a comfortable level.

Bubbly lather: about 1

Very low. Lard's lather is not bubbly or fluffy. It is a thin-to-medium, silky, creamy lather rather than a foamy one.

Creamy lather: about 40

High. This is where lard shines. The lather is dense, lotion-like and stable, and it feels rich on the skin.

Conditioning: moderate to high

Thanks to all that oleic acid, lard leaves skin feeling soft and comfortable rather than tight.

Iodine value: about 59

A middle-of-the-road number. Lard is less unsaturated than olive oil or sunflower oil, so it is less prone to rancidity than those, but it is more unsaturated than tallow or palm oil, so it still wants to be stored well.

INS value: about 139

INS is a rough predictor of overall bar quality. Lard on its own sits right at the lower edge of the generally recommended range, which tells you it works best as part of a blend rather than as a solo act.

Saponification value

Lard needs roughly 0.138 g of sodium hydroxide per gram of fat to fully saponify (about 0.198 g of potassium hydroxide if you are making liquid soap). Values vary slightly between sources, so always enter your oils into a calculator, such as the Soapmaid Lye Calculator, instead of working from memory. If you would like to understand the numbers behind it, our guide to SAP values in soap making walks through them step by step.

Does lard soap smell like pork?

No. Once saponified, fresh, well-rendered lard produces a soap that smells like clean, neutral soap. If you notice an off aroma, it almost always comes from lard that was scorched during rendering or from fat that was old or stored warm, not from the soap-making process itself.

Chapter 04

Lard, Tallow and Palm: How They Compare

Lard is one of three hard-ish fats that soap makers reach for when they want structure in a bar. Here is how they differ in practice.

Soft and creamy Lard

Lower in stearic acid and higher in oleic acid than the other two, so it makes a creamier, slightly softer, more conditioning bar. It is wonderfully gentle and easy to work with, and a very good all-rounder.

Hard and long-lasting Tallow

Rendered beef and sheep fat is higher in stearic acid, so it makes a harder, whiter, longer-lasting bar with a stable, creamy lather. It needs slightly more lye than lard (roughly 0.141 g of sodium hydroxide per gram), and the two blend together beautifully if you want the best of both.

Plant-based RSPO certified palm oil

The vegetable fat that lard is most often swapped in for. Palm gives a similar hardness and stable lather, with slightly more bubbles and a drier feel. If you want a plant-based bar, certified palm oil is the closest like-for-like swap, but remember to recalculate your lye whenever you change an oil.

Swapping tip

Never swap one fat for another gram-for-gram without running the recipe through a lye calculator again. Each oil has its own saponification value, and using the wrong lye amount is the most common cause of soap that is either harsh (too much lye) or oily and soft (too little).

Chapter 05

A Basic Lard Soap Recipe (Cold Process)

This is a simple, balanced, beginner-friendly cold process recipe built around lard. It uses lard for hardness and creaminess, olive oil for conditioning, coconut oil for cleansing and lather, and a small amount of castor oil to boost and stabilise the bubbles.

Lard & Olive Everyday Bar

Makes about 1.4 kg of soap, or roughly 10 to 12 bars, depending on the size of your mould. Superfat: 5%.

Oils

Lard: 450 g (45%)The hardness and creamy lather. Shop Australian Lard
Olive oil: 300 g (30%)Gentle conditioning. Shop Australian Virgin Olive Oil
Coconut oil: 200 g (20%)Cleansing and bubbles. Shop RBD Coconut Oil
Castor oil: 50 g (5%)Lather booster and stabiliser. Shop Castor Oil
Total oils: 1,000 g

Lye solution

Sodium hydroxide (caustic soda): 138 gSized for a 5% superfat. Shop Caustic Soda
Water: 280 gCool, distilled or filtered water. This gives a lye concentration of about 33%.

Extras (optional)

Fragrance or essential oil: up to 30 g (3% of oil weight)Always follow the recommended usage rate for your chosen scent. Browse Fragrance Oils
Colour: pinch to 1 teaspoon per kilo of oilsClays, oxides and micas all work well. Natural Colours & Clays · Mica · Oxides

Estimated bar qualities

Hardness about 39, cleansing about 14, conditioning about 54, bubbly about 18, creamy about 30, iodine about 58 and INS about 150. All of these sit comfortably inside the typical target ranges for a balanced everyday bar. These are estimates. Always enter your own oils into the Soapmaid Lye Calculator and use the lye amount it gives you, because oils vary slightly between batches and suppliers.

What you will need

  • Digital kitchen scales that measure to the gram
  • Safety goggles, long rubber gloves, long sleeves and closed shoes
  • A heatproof jug or container for the lye solution (stainless steel or heat-safe polypropylene, not glass or aluminium)
  • A stainless steel pot or large jug for the oils
  • A stick blender and a silicone spatula
  • A thermometer
  • A loaf mould, lined if it is not silicone. Browse Soap Moulds
  • Handy extras like measuring spoons and mixing tools. Browse Accessories

Method

Suit up and prepare

Put on your goggles, gloves and long sleeves, and work in a well-ventilated space with children and pets out of the room. Prepare your mould and clear your workspace. If you are new to handling lye, read our guide to safely handling caustic soda first.

Weigh everything

Weigh the water and lye into separate containers, and weigh each oil. Accurate weighing is non-negotiable in soap making, so use scales and not cups.

Make the lye solution

Slowly add the lye to the water, never the other way around, stirring until dissolved. The mixture will heat up quickly and release fumes, so keep your face turned away. Set it somewhere safe to cool to roughly 40 to 45 °C.

Melt the oils

Gently melt the lard and coconut oil together in your pot, then add the olive oil and castor oil. The cool liquid oils will bring the temperature of the blend down. Aim for roughly 40 to 45 °C, similar to the lye solution. Lard starts to cloud and firm up if it gets much cooler, so do not let it chill too far.

Combine and blend

Pour the lye solution into the oils through a sieve or down the stick blender to avoid splashing. Blend in short bursts, stirring in between, until the mixture reaches light trace: thin pudding consistency, where a drizzle leaves a faint trail on the surface. Lard usually traces at a steady, easy pace.

Add fragrance and colour

Stir in your fragrance or essential oil, and any colour you have pre-mixed with a little oil, until just combined. Pour straight away if you are using a fragrance known to accelerate trace.

Pour and insulate

Pour into the mould, tap out any air bubbles and smooth the top. Cover and insulate with a towel for 24 hours. This helps the soap go through gel phase, which gives a more uniform, slightly more translucent bar. Lard soap does not need to be warm, so skip the insulation if you prefer a creamy, opaque bar.

Unmould and cut

After 24 to 48 hours, once the soap is firm enough to hold its shape, unmould and cut into bars. Wear gloves, because the soap is still caustic at this stage.

Cure

Place the bars on a rack or tray in a cool, airy spot with space between them, and turn them occasionally. Cure for 4 to 6 weeks. Curing lets water evaporate, completes saponification, and gives a harder, milder, longer-lasting bar. Lard soap is lovely at 4 weeks and keeps improving beyond that.

New to cold process?

If this is your very first batch, our beginner cold process recipe and our comparison of soap making methods are both great companion reads.

Chapter 06

Tips, Storage and Troubleshooting

Store your lard properly

Fresh lard keeps well when it is cold and sealed. Keep it in an airtight container in the fridge for regular use, or freeze it in recipe-sized portions for longer storage. Warmth, light and air are what turn fat rancid, and rancid fat makes soap that goes off, so cool, dark and sealed is the rule.

Watch for dreaded orange spots

Soap makers talk about DOS, or dreaded orange spots, which are orange-brown spots or patches that appear on soap as its fats oxidise. Lard's unsaturated fats make it a little more susceptible than tallow or palm if it is old or stored poorly. The best defence is to use fresh fat, keep your soap cool and dry during and after curing, avoid overly high superfat, and store bars somewhere with good airflow. Adding a natural antioxidant to your oils is another common precaution.

Do not over-superfat

A superfat of 5% suits most lard recipes. Going much higher leaves more free oil in the bar, which can feel greasy and may speed up spoilage. If you want a richer bar, build it from the oils in your recipe, such as adding a spoonful of shea butter or another cosmetic butter.

Common problems

Soap is soft after 48 hours

Check your lye amount and your weights first. If the maths is right, it may simply need longer in the mould, particularly in cool weather. Give it another day or two before cutting.

Lard is cloudy or solidifying when I add the lye

Your oils have cooled too far. Gently warm them back up, or bring the lye solution up to a similar temperature, before combining.

Lather is thin or lacks bubbles

Lard makes creamy rather than bubbly lather. Increase the coconut oil a little, or lift the castor oil to around 5 to 7%, and recalculate your lye.

Soap has a lard or savoury aroma

This points to over-heated or older fat. Switch to leaf lard or a fresher, gently rendered batch, and consider a stronger fragrance.

White powdery layer on top

That is soda ash, which is harmless and cosmetic. Spritz the surface of the soap with rubbing alcohol after pouring, keep the temperature down, or simply steam or trim it away.

Blending ideas to try next

  • Lard and tallow: blend them for a creamy yet extra-hard bar.
  • Lard and rice bran oil: swap a portion of the olive oil for rice bran oil for a lighter, silkier feel.
  • Lard and shea butter: a small amount of shea butter adds richness without making the bar soft.
  • Lard and natural colour: lard's creamy white base shows off clays and oxides beautifully, so try a pinch of pink clay or an earthy oxide for soft, natural tones.

Want to get more from your blends? Our guide to choosing the ideal oil blend shows how each oil changes the final bar.

Chapter 07

Labelling and Selling Lard Soap

If you plan to give your soap to friends or sell it, be upfront that it contains an animal-derived fat. Lard soap is not suitable for vegans or vegetarians, and some customers will also avoid pork-derived products for religious or cultural reasons, so clear labelling is both a courtesy and good business practice.

On the ingredient list, saponified lard is commonly written as Sodium Lardate, alongside the other saponified oils in your recipe. Requirements for cosmetic and soap labelling in Australia depend on what you make and how you present it, so please check the current rules before you sell. Our overview of how cosmetic products are regulated in Australia is a helpful starting point. Presentation matters too, and you can find wrapping and boxes in our Packaging collection.

FAQ

Frequently Asked Questions

Is lard good for soap making?

Yes. Lard has been used for generations because it makes a white, mild, creamy and conditioning bar. It is best used in a blend with a little coconut oil or castor oil for lather.

How much lard should I use in a soap recipe?

Most recipes use between 30% and 50% lard. Around 45% gives a firm, creamy bar, as in the recipe above. Going higher than 60% tends to make a bar with limited lather.

Can I make soap with 100% lard?

You can, and it is a traditional soap, but it will be low on bubbles and cleansing. Most soap makers prefer to add coconut oil for lather and a liquid oil for balance.

Does lard soap need a different lye amount to other soaps?

It needs its own lye amount, based on lard's saponification value. Every recipe should be run through a lye calculator, and the amount should be recalculated if you change any oil.

Can I use supermarket lard?

Many soap makers do. Check the label, because some commercial lards are hydrogenated or contain preservatives, which can change how the fat behaves. Plain rendered lard with nothing added is the most predictable choice.

How long does lard soap last?

A well-made, properly cured bar of lard soap is long lasting. Because it is firm and gentle, it is often prized for everyday hand and body use. Store bars somewhere cool and dry, and use fresh fat to get the best shelf life.

What can I use instead of lard?

Tallow is the closest animal-fat substitute, and RSPO certified palm oil is the closest plant-based swap. In both cases, update your lye amount.

Handling caustic soda. Sodium hydroxide is highly corrosive and can cause serious chemical burns and eye injury. Always wear safety goggles, gloves and protective clothing, work in a ventilated space, and keep children and pets away. Always add lye to water, never water to lye.

Accuracy. Recipes in this guide are provided as a starting point. Always check your recipe in a lye calculator before making it, as oils vary between suppliers and batches. Soapmaid accepts no responsibility for results that depend on your own measuring and technique.

Animal-derived ingredient. Lard is derived from pork. Soap made with it is not suitable for vegans, vegetarians or anyone avoiding pork products. Always disclose this to anyone who will use your soap.

Selling your soap. If you sell soap or cosmetics, you are responsible for meeting the labelling, safety and regulatory requirements that apply to your products in Australia.

Skin sensitivity. Always patch test new products, and discontinue use if irritation occurs. Statements in this guide are general information about soap making and are not medical advice.

Ready to Make Your First Lard Soap?

Grab your lard, lye and favourite oils, and make a classic, creamy bar of your own.

Shop Australian Lard Use the Lye Calculator
Disclaimer: This guide is provided for general information and educational purposes only. Soap making involves caustic soda (sodium hydroxide), which can cause serious burns and eye injury, so always wear appropriate protective equipment and follow safe handling practices. Recipes are a starting point only and must be checked in a lye calculator before use, as results depend on your ingredients, measurements and technique. Lard is an animal-derived ingredient and soap made with it is not suitable for vegans or vegetarians. If you sell soap or cosmetics, you are responsible for meeting all labelling, safety and regulatory requirements that apply in Australia. Nothing in this guide is medical advice. Soapmaid Australia accepts no liability for any loss, injury or damage arising from the use of this information.
Shop the story