CANDLEMAID Pillar Soy Wax

• Product Name: Soy Wax Granules
• INCI Name: Hydrogenated Soybean Oil
• Source: 100% natural soy bean wax
• Grade: Candle / Industrial Grade
• Form: Uniform small white pellets — smooth finish, free of clumps and impurities
• Appearance: Small, uniform white pellets
• Melting Point: 56°C-58°C
• Suggested Pouring Range: 70–80°C for optimal fragrance retention and adhesion
• Suggested Maximum Fragrance Load: 6–8% of wax weight (dependent on fragrance potency — testing required)
• Application: Mould candles, pillar candles, wax melts — NOT recommended for container candles (higher melting point produces brittle surface cracking in containers)
• Acid Value: 0.21 mgKOH/g (spec: ≤0.9 mgKOH/g) — COA confirmed; low acid value indicates fresh, high-quality wax
• Moisture & Volatiles: 0.02% (spec: ≤0.05%)
• Peroxide Value: 0.01 g/100g (spec: ≤3.9 g/100g) — COA confirmed; extremely low; excellent oxidative stability

• 100% natural soy wax — made from 100% soy bean wax; renewable, biodegradable, vegan
• Pellet/granule form — uniform size eliminates clumping, bridging, and measurement inconsistencies; feeds consistently into melting equipment; minimal dust; cleaner and more efficient than flakes
• Near-white colour — Lovibond colour result of 1.40R (well below 3.0R spec); minimal natural colour means dyes and colour choices are not affected by a yellow wax base
• Ideal melting point for pillar and mould candles — 58°C produces a firm, hard candle that holds its shape without container support; suitable for Australian ambient temperatures
• Excellent fragrance retention — 6–8% fragrance load capacity for strong hot and cold scent throw
• Low acid value (0.21) — indicates fresh, high-quality wax with minimal oxidation; fresh wax produces better fragrance binding and colour stability
• Minimal moisture (0.02%) — extremely dry batch; no moisture-related issues in melting and pouring
• Near-zero peroxide value (0.01) — outstanding oxidative freshness; no rancidity concerns

• 100% natural soy wax — non-toxic, biodegradable, vegan
• Combustible — like all waxes, soy wax is combustible when in candle form; standard candle fire safety applies
• Hot wax burn hazard — melted wax at 70–80°C presents a burn risk; use heatproof equipment and handle with care; never leave melting wax unattended
• Do not overheat — do not heat above 85°C; sustained overheating degrades wax quality; keep away from open flames during melting — use dedicated wax melter or double boiler
• Store away from heat sources — solid soy wax granules begin to soften above 58°C; store in a cool, dry location; in hot Australian conditions (QLD, NT, WA summer) store in a temperature-controlled environment
• Not for food use in finished candle form — while soy wax is food-derived, finished candles are not for consumption
• Keep out of reach of children

What is the melting point of these Soy Wax Granules?

58°C — at the upper end of the 42–60°C specification range. This is ideal for pillar and mould candles, producing a firm, hard wax that holds its shape without a container at room temperature, including during warm Australian summers.

Can I use these granules in container candles?

No — these granules have a melting point of 58°C which is too high for container candle applications. Container soy waxes typically melt at 46–50°C and are specifically formulated to adhere to glass or tin container walls on cooling. At 58°C, this wax will produce a hard, brittle surface that cracks and pulls away from container walls. For container candles, use a purpose-formulated container soy wax.

What temperature should I pour at?

The suggested pouring range is 70–80°C. Add fragrance at 70–75°C after removing from heat, stir thoroughly, and pour while still fluid. Pouring too cool (below 70°C) can cause poor fragrance binding, uneven surfaces, and air bubble incorporation. Pouring too hot (above 85°C) can cause fragrance to flash off and may affect surface finish.

Do I need to do a relief pour?

Yes — soy wax contracts as it cools, typically forming a sinkhole around the wick in pillar and mould candles. Once the initial pour has cooled to approximately 50°C at the surface (still slightly warm to the touch), perform a small top-up relief pour to fill the sinkhole and level the top surface. This is standard practice for all mould candle production.

How much fragrance do I use per kilogram of wax?

At 6% fragrance load: 60g of fragrance oil per 1kg of wax. At 8% fragrance load: 80g of fragrance oil per 1kg of wax. Always weigh your fragrance — do not measure by volume.